YJ
The shower skylight has an inner and outer clear dome.
If you remove the inside dome bezel(frame)by removing the white screws the frame and dome will come away.
Cut your film slightly larger than the dome area and apply to the upper side of the inner dome. My UV film is applied with water and is easily relocated as desired then squeegee out the air bubbles.Tinted film came from Amazon.
Reverse sequence to reinstall dome and bezel.
All done.
Did not do the rollers..yet.
Might install a MAXXAIR fan over the beds but first want to test out the current fan once weather heats up.
|