2002 Conquest Lite TT (19’). Bought used put new converter and battery in and the camper sat unused 18 months while repairing. Plugged into shore power All the AC and DC work. Output at converter 13.75v but at the battery it’s battery voltage (12.48v). Unplug from shore power no DC. Voltage at converter 0.45 v. I’ve traced the red wire from converter to battery and all good. All fuses good. The DC system works when plugged into tow vehicle. I took the camper for a short ride to test the WDH. When I returned and plugged into shore power AC power worked but none of the DC/interior lights. The outside DC light works. Unplug from shore power plug into tow vehicle the interior lights work but the outside light does not. Also when on shore power the carbon monoxide alarm does not glow green and I get a low beep (from the alarm?). I’m completely at a loss.. Any direction/help is appreciated. Oh, The DC panel was not changed when I bought a new converter.
|