Suburban SW10DE Water Heater Problem
The problem is: The heater will start on gas. The heater will start on Elect.
It will heat the water about 1 degree and no more. I have replaced the element. I have a full tank. I suspect the temp limit switchs are bad. The reset does nothing. If I remove the wires from each switch and link them together, Thus bypassing the switch, and restart the heater, will I do any harm if I use caution and turn off before the water gets to hot?
__________________
I've got a 50-50 chance to suceed, either I will or I won't, those are good odds aren't they?
|