Quote:
Originally Posted by Chuck v
Phil,
Sorry I don't have any 'after' pictures and have since sold the coach. As to the main slide and any sticking, the large slide does have a bit of a struggle initially when it retracts as the floor cams up over the UHMW plate on the lip of the opening, but after that it ran fairly smoothly. I always made this retraction with the shore power connected (or the engine idling...) as running the hydraulics on just the house batteries seemed a bit marginal.
Chuck
|
Yep, the same. Meanwhile, after I posted this, my B/R slide went out. It would only move an inch or two. It was binding somewhere. Tore it apart and manually pushed out the slide. Noticed that one of the rollers wasn't even making contact with the bottom of the slide and then that the pinion coming off of the motor had a retaining pin that had backed out 1/2" preventing it from rotating cleanly. Fixed after 4hrs and plenty of yoga poses to get to it. Had to remove just about everything. haha