Gulf Stream Owners RV Forum - View Single Post - Hidden grease fittings on tandem Dexter axle trailers

Life on the fishing pier · 08-08-2022, 07:22 AM

Only for those which have tandem axles and use the Dexter EZ flez system. Look between the wheels and if you see two aluminum castings with a rubber cylinder between the two on the bottom, there a good chance you can have up to eight grease fittings per side. My axles are 2,800 pound and there are only two grease fittings per side. Above the rubber piece there's a bolt that attaches the two aluminum castings to the frame. Each casting has a grease fitting on the upper side. You may need to feel for it since they are hidden unless you're in just the right spot.
I'm not sure about the lube schedule but mine are getting greased at least once a year.

08-08-2022, 07:22 AM	#1
Life on the fishing pier Member Join Date: Jun 2022 Location: West Lafayette Posts: 79	Hidden grease fittings on tandem Dexter axle trailers Only for those which have tandem axles and use the Dexter EZ flez system. Look between the wheels and if you see two aluminum castings with a rubber cylinder between the two on the bottom, there a good chance you can have up to eight grease fittings per side. My axles are 2,800 pound and there are only two grease fittings per side. Above the rubber piece there's a bolt that attaches the two aluminum castings to the frame. Each casting has a grease fitting on the upper side. You may need to feel for it since they are hidden unless you're in just the right spot. I'm not sure about the lube schedule but mine are getting greased at least once a year. __________________ Do the common uncommonly good.