there are split inboard and outboard boots for the front wheel drive half shafts, but keep checking or fabricate your own with some of the new glues and materials, just remember that boot flexes up and down following movement of the arms and rotates or twists with the steering angle. Thats a lot of movement in such a small area. The one tear might be bonded with glueing the edge to edge or a patch, the upper look pretty gone. But clean up good so you can see what needs repaired and in you can get a good bond to the rubber. Glues are advertised to bond well enough to hold air in a tire. Could be worth a few bucks to give it a try if your going the route of boot repair.
|