Some tips to get you started which you may already know.
1.0 Make sure water heater is turned off at panel then let cool. Using a 1-1/16" socket remove the anode rod from the water heater from outside panel to drain water from heater. Set aside anode rod for spring time.
2.0 Remove heater access panel below both wardrobe drawers adjacent to entrance door. Rotate both ball valves to bypass mode on rear of heater. Return to non bypass mode in the spring.
3.0 Under the jacknife bed locate the convenient suction tube to pump R V antifreeze into
the water lines. Isolate fresh water tank using inline ball valve prior to starting pump.
4.0 Study You Tube videos to understand the winterizing sequences.
5.0 Some folks assist the process using compressed air regulated to 40psi using an oiless compressor
|