Hi Washetas.
I have the same issue on my 2002 Friendship 8362. Until I can afford a complete rehab of the outside, I am sanding each spot with 2000 grit wet sandpaper until the clearcoat edge cannot be felt any more, then expanding the sanding to rough up the good clearcoat around it. Wipe with microfiber cloth and isopropyl alcohol to remove any bits. Then, spray over the sanded area with a Protective Clear Enamel to prevent more peeling.
You could also use real clearcoat, but that requires mixing and is much more expensive. If you go that route you would probably want to do the paint underneath first, using the automotive color codes and sanding back to unfaded colors. If your peeling is not extensive, this would most likely suffice and you would not have to try to get the entire coach redone. Many videos on YT demonstrating. HTH.
|