View Single Post
Old 06-28-2020, 11:57 AM   #3
THenne1713
Senior Member
 
Join Date: Aug 2017
Location: Memphis
Posts: 749
Send a message via AIM to THenne1713 Send a message via Yahoo to THenne1713
Default

1) Sounds like DISCONNECT between CONVERTER AND FUSE PANEL, (NO Battery or CONVERTER power to the FUSES?) and common is a pair of (x2) Blown REVERSE POLARITY 30a FUSES, often on fuse board ABOVE row of others; if battery was installed backwards, will usually blow BOTH 30a fuses 2) CONVERTER COOLING FAN ONLY WORKS ON HEAT/ LOAD, so low load/ no load = No Fan Needed (MINE has never run since converting to LED Lights); 3) I have seen pics of (some) fuse boards w/ no RP fuses visible, wonder if they are mounted on BACK of fuse board and require board to be unmounted to see?
<< Well, I had power in the RV since I had it and then no power due to dead batteries. I discovered that I may have had a Power converter problem, so I changed it out the old one had been in since it was manufactured. Now I have one that monitors the power w/ float charging by Progressive Dynamics. After my install, I still have no DC power, only AC power when on Shore Power. I've tried looking for manual breaker to do a reset by pushing in the button, but can't find it. I also discovered that my fan on the Power Converter is not turning, but the light on the circuit board flashes in all modes correctly. Can someone please help me, and if you know of a good mobile RV mechanic that can help in Atlanta, GA. please let me know...>>
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
THenne1713 is offline   Reply With Quote