Gulf Stream Owners RV Forum - View Single Post

RVFan · 04-15-2023, 01:28 PM

My RV's power center's converter breaker is tripping the land-side GFCI when the unit is plugged into a 110 outlet at my house. All other converter breakers are working fine when plugged into land-side GFCI house outlet. None of the DC fuses are blown. SO... Time for a new converter.

My current model was a factory WFCO 8935PEC integrated breaker and fuse panel with a converter below the breaker/fuse box. Per the label converter input 105-130VAC, 60HX, 8A, 600W. Converter output 13.6 VDC 35A (includes charging and load).

There is no direct replacement from WFCO and my preference would be to have a fully enclosed unit (with enclosed fan) 3 wire AC in and 2 wire DC out.

What replacement mfg/model do you recommend? It will be mounted in the same place as the previous unit. The previous unit was mounted on a plastic frame but I assume the enclosed unit will not care about the material on which it is to be mounted, right?

04-15-2023, 01:28 PM	#1
RVFan New Member Join Date: Apr 2023 Posts: 3	Converter Replacement My RV's power center's converter breaker is tripping the land-side GFCI when the unit is plugged into a 110 outlet at my house. All other converter breakers are working fine when plugged into land-side GFCI house outlet. None of the DC fuses are blown. SO... Time for a new converter. My current model was a factory WFCO 8935PEC integrated breaker and fuse panel with a converter below the breaker/fuse box. Per the label converter input 105-130VAC, 60HX, 8A, 600W. Converter output 13.6 VDC 35A (includes charging and load). There is no direct replacement from WFCO and my preference would be to have a fully enclosed unit (with enclosed fan) 3 wire AC in and 2 wire DC out. What replacement mfg/model do you recommend? It will be mounted in the same place as the previous unit. The previous unit was mounted on a plastic frame but I assume the enclosed unit will not care about the material on which it is to be mounted, right?