Quote:
Originally Posted by wchoe
The pex tubing connecting to my Suburban SW6 water-heater is leaking and I need to remove it to access the tubing. This is on a 2008 Gulfstream Vista Mini Cruiser on a 3500 Sprinter chassis.
After removing all the screws on the metal-frame in front, and the 3 retaining-screws on the water-heater, I can't remove the metal-frame to pull out the heater.
I have tried cutting the caulking around the metal-frame and used a pry-bar, but it is still stuck.
Please let me know if someone has experience working on this.
Thanks
|
As mentioned, that tape is very sticky and can be difficult. Might try a hair dryer to soften it up.