View Single Post
Old 12-18-2008, 03:23 PM   #3
jhan
Junior Member
 
Join Date: Nov 2008
Posts: 26
Default

Hi,
Everything looked okay from the fill to where it enters into a hole cut into the frame. The only difference I can see is the vent hose on the passenger side came below the fill hose on the last turn from the frame up to the fill neck. Is that what you mean by 'no dips'?
The hoses looks like hard metal tubing with bunch black stuff sprayed on it. Should I just try to push it above the fill hose?

I found this link while researching the problem.

The author said to check the vent tube on top of the fuel tank. I'm not sure how to gain access to the top of the fuel tank on the Tour Master to do that.

Thanks.
__________________
2006 Gulf Stream Tour Master T-36
jhan is offline   Reply With Quote