Quote:
Originally Posted by RY469
Sounds like they are going to upgrade you to the auto-level system (control panel #3103). The way the auto system reports gear up is different from yours, will require some expertise to install (one discrete Vs four). If what I said in last reply did not make sense, I'd suggest you use this option.
Otherwise, toggle switches (available many places) using power at existing control panel (J3) will return (simple) manual control of your jacks. You can get elaborate and use the individual discretes to light LED's for each jack, add a relay to tie in ignition disable, etc. if you want. "Retract all" can be flipping several switches at once, or install separate switch for this . . . Depends on your level of comfort with electrical systems.
Yes, I have done these sort of things before, I am an RV Service Tech at RV Dealership near Chicago. Maybe best you find someone near you to assist?
|
I Understand a portion of the wiring list you sent.
1. Brown Left front jack valve output 12 VDC +. This says its for out put.
#3, #5, #7, are the same,
Does this mean, #9 hooks up to the return side on all the Momentary switches?
What i don't see is a wire that pulls the jacks back in/up. Unless its as stated above using the #9 wire as the return .
My plan was to use a 3 way switches that are Momentary on, off, and Momentary on.
The jack lights is position lights are a pretty easy task.
Can we continue this by private email.
Mike Root
Tulalip Washington
35 miles northwest of
Seattle
Text Only 425-344-4709
[email protected]