All these seem to be indicators, but not direct evidence of what is the real capacity. Why can't one look at the input wiring to the fuse panel. If red goes to one set of fuse and black to another set it was wired for 220 Volt and the breaker size determines the amperage. 50 amp is really only 25 amp per input feed, ie 50 amp is total.
Some are confusing wattage with amps. Regardless of how
FEMA was specds , if your trailer could have been modified, AGAIN you should look at the wiring into fuse panel, look for wire gauge and circuit wiring. People seem to be confused with 50 amp vs 30 amp the amp capacity of 50 is 25 per L.
The only way you can run 50 amp per L is go to 6 gauge wire, 6 gauge will be very obviously larger than 10 gauge. 6 gage will be about .160 inches in diameter and very stiff to bend.
|