[RayChez1]

The seat moving forward is only for the slide right behind the driver and that is to protect the seat from the slide hitting it when moving the slide. You can operate all the other slides without the seat micro switch. Now it would help to know which slide does not want to work for you.

Usually Gulf Stream has a rack and pinion gear type on the bedroom slides. They are not hydraulic. On my coach the only hydraulic slide is the big slide right behind the driver seat and for that the seat has to move all the way forward until the micro switch trips off the small rail it rides on located on the right side towards the rear of the seat rail guide. Two wires lead up to it.

Now if it is the bedroom slides they have a circuit breaker that is located on the passenger side towards the rear compartment, next to the battery compartment. It is a small circuit breaker and when it trips a small handle will spring out. Press it back into the small circuit breaker and reset. That will get your bedroom slides going.