Thread: SN Shocks
View Single Post
Old 01-20-2022, 05:43 PM   #3
Tonyf
Member
 
Join Date: Dec 2021
Posts: 47
Default

Quote:
Originally Posted by pwerwagn View Post
You can still get road kings directly thru king shocks. They are just 2.5" or 3" king emulsion shocks, and they have the valving spec on hand if you call them.

--Jeff
Perfect, thanks. Will call them once I’m ready to do the shocks, my coach already has Monroe shocks upfront, but nothing in the back.

I added the Timbren rear suspension enhancers, part number RES001 for future reference . They are mainly rubber springs. Had to raise the MH so the suspension hung free, remove the stock bump stops, drill four holes on each side and install the Timbrems. Back end raised ~1.25 inches, haven’t drove it yet with the Trimbrens but will soon. They have a 8600 lb load capacity. Did not want air bags, such as airlift, as it’s more to break and fool with. Also was not spending all that cash for an aftermarket air ride retrofit.

Still gathering parts to add the shocks, should have everything next month.
__________________
2008 SN 6372
Tonyf is offline   Reply With Quote