View Single Post
Old 11-15-2018, 09:35 AM   #2
Sudsy
Senior Member
 
Sudsy's Avatar
 
Join Date: Mar 2017
Location: Mechanicsville, Md.
Posts: 487
Default

Quote:
Originally Posted by Kramervskramer View Post
We have recently purchased a 2018 Bt cruiser. We have hooked up to city water successfully but are trying to figure out how to fill the water tank. There is an opening to fill the water tank by gravity feed, but when we put the hose in the opening, the water will not go into the storage tank. It runs back out of the filling pipe.



Check your levels and make sure it isn't already full. If it's not full try reducing the water pressure of the hose you're using. There is a vent next to the fill hole in the gravity fill. Normally the water would flow into the tank and when it is full it comes back at you out of the smaller vent hole. When things are working normally you should feel/hear air coming from the vent hole.



If you do find the tank full and you didn't fill it I would drain it and flush with a little bleach and water then drain that and re-fill.


Sudsy
__________________
2005 Sun Voyager Workhorse W24 with 8.1 ltr Chevy. Allison 2100 transmission. Full body paint.
Sudsy is offline   Reply With Quote