|
04-27-2021, 06:24 AM
|
#1
|
Member
Join Date: Apr 2021
Posts: 33
|
Speaker not working...
New Vintage Cruiser 19RBS. One of the interior speakers is not working. Took the speaker out and the wires are indeed connected. How do I remove the radio from the cabinet so I can check the rear connections?
Thanks.
|
|
|
05-02-2021, 09:50 AM
|
#2
|
New Member
Join Date: Nov 2020
Posts: 9
|
I have a 2019 Cabin Cruiser 24RBS. If the radios are similar, I took a plastic painting spatula & was able to gently pry the plastic molding loose on each side of the radio. Once I got it stated, I used the spatula as a protector to the surface & used a butter knife (non serrated ) to pry the trim molding completely off, being careful not to break the plastic prongs holding it in place. Once off you can access the screws holding radio in place. The trim will snap back in place when finished. Hope this helps...
|
|
|
05-09-2021, 02:58 PM
|
#3
|
Senior Member
Join Date: Aug 2017
Location: Memphis
Posts: 754
|
Did you check that L/R and Front/Rear Faders are set to mid-point?
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
|
|
|
05-09-2021, 03:33 PM
|
#4
|
New Member
Join Date: Sep 2020
Location: Chattanooga
Posts: 24
|
If your camper is new, and if possible, I would let your dealer handle this under the warranty. If you go tearing into it and don’t get the job done you may have voided the warranty on that repair. That said, these stereo units are very low end and notoriously problematic. Your stereo may be defective and the speaker actually fine. All the more reason to let your dealer sort it out.
|
|
|
05-18-2021, 08:48 AM
|
#5
|
Member
Join Date: Apr 2021
Posts: 33
|
I have an appt with a dealer next month to have this looked at. I'd really like to avoid it if this is something as simple as a wire not plugged in.
|
|
|
05-22-2021, 12:43 AM
|
#6
|
Senior Member
Join Date: Aug 2017
Location: Memphis
Posts: 754
|
Quote:
Originally Posted by PaddlePAT
I have an appt with a dealer next month to have this looked at. I'd really like to avoid it if this is something as simple as a wire not plugged in.
|
and the answer? Did you check that Left/Right and Front/Rear Fader Controls on the Radio are set to mid-point so that all four +speakers work?
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
|
|
|
05-22-2021, 09:23 AM
|
#7
|
Member
Join Date: Apr 2021
Posts: 33
|
I fixed it. Figured out how to remove the stereo and found out that a speaker wire was disconnected.
What great Quality Control GS has...
|
|
|
05-22-2021, 11:06 AM
|
#8
|
Senior Member
Join Date: Apr 2021
Posts: 279
|
PDI
That should have been caught by the dealership you bought the unit from during PDI (Pre-delivery Inspection). Shame on them.
|
|
|
12-05-2021, 10:43 AM
|
#9
|
Member
Join Date: Dec 2020
Location: McHenry
Posts: 48
|
When I purchased my 199RK new, I got it home and found that the antenna would not pick up one radio station, nor one tv station. I told , multiple times, the salesman that this SHOULD have been found during dealer prep, that I PAID for. We went round and round and finally THEY sent a truck and took my trailer to their shop (2 3/4 hours away) and fixed this issue along with another one that should have been found during my paid for dealer prep. They were assholes about it, and must have got tired of my rightful bitching, at least my useless salesman Brian was, and when done, they even towed the trailer back to my house. I am very happy and since then, they have gotten a different service manager and this guy is on top of things. If it is something that should have been found in your dealer prep, keep on them about it and don't do work yourself until the warranty is up.
|
|
|
11-22-2021, 06:13 AM
|
#10
|
New Member
Join Date: Nov 2021
Posts: 1
|
Have you tested to see if the wiring is still in good condition, i.e. is the circuit complete.
just a thought.
|
|
|
12-01-2021, 07:37 PM
|
#11
|
New Member
Join Date: Sep 2021
Location: Marshfield
Posts: 4
|
What size speakers and what radio did you install I have a Bt100 radio very low end want to upgrade.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|