Quote:
Originally Posted by THenne1713
THERE IS A BROKEN PIECE OF A Black HOSE END fitting still attached, (in pic, almost unhooked and could fall off), suggest you remove it? Suspicion would be tape covering a crack, but (end adapter for hose w/ pins) may have been replaced and secured w/ tape vs glue? BTW, if you carefully remove wires, wire brush and reinstall, it may help accuracy of the tanks sensors (if having any issues)? Luck to ya EDIT/ ADD: YOU WILL NEED A CAP/ W gasket and retainer chain/cord?
|
First thank you for the suggestion on cleaning the connections, I will put that on my list of things I'm redoing.
The "broken hose end fitting" which I think you're referring to, (pointed out in the picture below) is not, it's a cap and not the greatest cap by far and will be replaced with a proper one with a chain.
Looking for a new connection that will fit my set up is proving to be hard to find.
I checked with etrailer and I'm waiting for a call back.
In the mean time, any suggestions to where I can find the connection I have, links, etc.?
So far I can only find this one which will NOT work with my set up as the grey pipe discharge connection is in the wrong spot.
Another question I have, do these typically have PVC cement to secure them, or are they just fitted on by hand?
Last I did my first dump the other day and had no leaks, so the tape or what ever is holding this connection together is sealed, but I don't like how it hangs down about 4". Going over speed bumps, driveways etc. makes me pray I don't hit it and break it off.