Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 12-13-2022, 10:27 AM   #1
Kenmax
New Member
 
Join Date: May 2022
Posts: 17
Default Waste valve replacement

Is there a video to watch to replace a graywater valve on a 2003 conquest motorhome?
Kenmax is offline   Reply With Quote
Old 12-25-2022, 11:41 AM   #2
Dennis4809
Senior Member
 
Join Date: Apr 2013
Location: Graham
Posts: 212
Default

Have you looked at the valve? Empty the tank, remove the 4 screws that hold the valve, replace the valve, put the screws back. Pretty short for a video.
__________________
2006 Gulf Stream Friendship G7
350 Cat, Crusier Lift w/ Honda VTX
Blue Ox and 2019 Chevy Blazer RS AWD V6
Dennis4809 is offline   Reply With Quote
Old 12-26-2022, 09:59 AM   #3
Kenmax
New Member
 
Join Date: May 2022
Posts: 17
Default

HeTY es I looked at it ,that is how I knew it was leaking. The mounting bolts were rusted up and I had to cut them out and I boogered up the the mounting flanges that the valve mounts to.
I was wanting to know if the flanges are replaceable
Kenmax is offline   Reply With Quote
Old 12-26-2022, 01:20 PM   #4
Dennis4809
Senior Member
 
Join Date: Apr 2013
Location: Graham
Posts: 212
Default

Everything is replaceable. Only a question of time and money. Any RV shop will be able to sell you the flanges. They may have to order as doubt that they sell many. Hopefully you only screwed up one side. That one will require cutting the pvc pipe, maybe adding a short section of pvc and cementing everything back together. Gray willl be a lot easier to work with than the black so in that regard you’re lucky. With what’s happened so far, might look at finding a plumber or someone familiar with working with PVC.
__________________
2006 Gulf Stream Friendship G7
350 Cat, Crusier Lift w/ Honda VTX
Blue Ox and 2019 Chevy Blazer RS AWD V6
Dennis4809 is offline   Reply With Quote
Old 12-26-2022, 03:26 PM   #5
Chuck v
Senior Member
 
Join Date: Dec 2009
Posts: 887
Default

"With what’s happened so far, might look at finding a plumber or someone familiar with working with PVC" Diplomatic Dennis is giving good advice on not letting this project escalate. You may or may not need an experienced tradesman to finish this without further complications.


Good judgement comes from experience, and experience may or may not come from bad judgement, depending on your luck and skill-set...


Let us know how it all turns out -- with pictures if possible.


Chuck
__________________
2007 Tour Master T40C
Acura MDX toad

"It takes a great deal of time to recover from any improvement..."
Chuck v is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 10:24 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
×