Super Nova Rear View Camera System Replacement

[Madkel]

Greetings!

Now for the next issue.....

My 2008 Super Nova has a Voyager Rear view monitor and camera system.
I do not know if it was original equipment or an add on.

The system is black and white and the video quality is terrible. The monitor picture is washed out and the brightness or contrast cannot be adjusted.

I NEED to replace it with a color / better rear view system so I can keep track of what is behind me.

The current system is hard wired and uses a 4 wire square connector for the video feed. I am sure this goes to the camera for power and video, but I have not removed the camera for the back of this very tall rig to confirm.

The connection to the monitor uses a separate connector for:
- Power - can be left on all the time
- Reverse switch power - for backing up
- ground

My questions / request for information is:

- is the current Voyager system from the GS factory?
- Has anybody replaced their system with an updated system?
- If so, what replacement system did you use?

My preference would be for a "Plug n Play" replacement system that uses the existing wires. If I cannot use the existing wires, not a big deal and a wireless system would be used.

Looking forward to hearing from others on recommendations or experiences.

Thank you

[pwerwagn]

Mine has the black and white camera/display too, with sound. Mine does have brightness adjustments.

A friend of mine recently put a bluetooth camera in his RZR with a monitor in the dash. Rear view mirrors are nearly useless in UTV's, and this solution works pretty good. He was showing me the box, and the camera on his has a 40' range to the monitor. Its a 7" monitor, he got it off amazon for like 90$ or so. I am half tempted to try one on my SN. The only thing his doesnt have is sound, and I like the sound function on mine.

Maybe worth a shot?

[THenne1713]

Originally Posted by Madkel

Greetings!

Now for the next issue.....

My 2008 Super Nova has a Voyager Rear view monitor and camera system.
I do not know if it was original equipment or an add on.

The system is black and white and the video quality is terrible. The monitor picture is washed out and the brightness or contrast cannot be adjusted.

I NEED to replace it with a color / better rear view system so I can keep track of what is behind me.

The current system is hard wired and uses a 4 wire square connector for the video feed. I am sure this goes to the camera for power and video, but I have not removed the camera for the back of this very tall rig to confirm.

The connection to the monitor uses a separate connector for:
- Power - can be left on all the time
- Reverse switch power - for backing up
- ground

My questions / request for information is:

- is the current Voyager system from the GS factory?
- Has anybody replaced their system with an updated system?
- If so, what replacement system did you use?

My preference would be for a "Plug n Play" replacement system that uses the existing wires. If I cannot use the existing wires, not a big deal and a wireless system would be used.

Looking forward to hearing from others on recommendations or experiences.

Thank you

TIP: 1) I discovered early that if camera video quality= bad, =CLEAN THE LENS. RAIN, FOG, MORNING DEW CAN RENDER BLANK SCREEN, OR 80% BAD. 2). Mount camera where more easily reached/ cleanable. Some say below clearance lights gives better night vision, less interference. I can clean mine by stepping on bumper while holding ladder.

[THenne1713]

Originally Posted by Madkel

Greetings!

Now for the next issue.....

My 2008 Super Nova has a Voyager Rear view monitor and camera system.
I do not know if it was original equipment or an add on.

The system is black and white and the video quality is terrible. The monitor picture is washed out and the brightness or contrast cannot be adjusted.

I NEED to replace it with a color / better rear view system so I can keep track of what is behind me.

The current system is hard wired and uses a 4 wire square connector for the video feed. I am sure this goes to the camera for power and video, but I have not removed the camera for the back of this very tall rig to confirm.

The connection to the monitor uses a separate connector for:
- Power - can be left on all the time
- Reverse switch power - for backing up
- ground

My questions / request for information is:

- is the current Voyager system from the GS factory?
- Has anybody replaced their system with an updated system?
- If so, what replacement system did you use?

My preference would be for a "Plug n Play" replacement system that uses the existing wires. If I cannot use the existing wires, not a big deal and a wireless system would be used.

Looking forward to hearing from others on recommendations or experiences.

Thank you

Suggest power camera from rear clearance lights= control from HL SWITCH vs maybe now on backup lights? 2) CLEAN LENS, then eval picture quality

[Madkel]

Greetings,

Thanks for the tips.
Yes, I have cleaned the camera lens and yes it is mounted below the rear marker lights on the back.

I am still struggling on trying to figure out the square camera/monitor wire connection. it is small and has 4 wires, but the majority of current hard wire connectors (eg: GX12 connectors are round. I would like to just buy a new monitor and a camera to just plug it in but am not the most up to date on these connectors.
Sorry, have not been able to take a picture of it yet.......
The Ball is in my court to dig this up.