Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-02-2021, 06:08 PM   #1
kw4
New Member
 
Join Date: May 2021
Posts: 6
Default Bottom of slide does not fully close

Is there an adjustment for the slide to lift the slide so it will close fully on the bottom? I have a hydraulic slide on a 97 Sunvoyager. The slide opens and closes with the top and bottom not always moving together. The slide tilts in and out when moving. I'm worried about water or snow causing problems.

Thanks


97 34 ft
Sunvoyager
kw4 is offline   Reply With Quote
Old 08-15-2021, 09:49 AM   #2
VaHappyCamper
Member
 
Join Date: Mar 2019
Location: Christiansburg
Posts: 30
Default

The tilting in and out is normal. Depending on the slide type, they can be adjusted. I do suggest for the first time to get someone that knows what they are doing to make the adjustments.
VaHappyCamper is offline   Reply With Quote
Old 08-15-2021, 02:09 PM   #3
bmojmhs
Member
 
Join Date: Jul 2016
Location: Vancouver
Posts: 46
Default Slide Out Adjustment

Attached is the service info for the hydraulic system on my 2005 UltraSupreme. You can see what it takes to make adjustments to the slides. If you are not mechanically inclined, do not have the tools or the time, then take it to someone who knows what they are doing.

On my living room slide the bottom moves first to climb over the teflon strip along the edge of the floor. As the slide moves in, the centre of gravity changes and then top will fall forward and come in. The top will hit the outside wall first and then the bottom will be pulled in. As mentioned elsewhere, what is happening on your unit is standard, except for the bottom not coming in fully..
Attached Files
File Type: pdf SERVICE_INFO_FOR_GULF_STREAM.pdf (42.7 KB, 5 views)
bmojmhs is offline   Reply With Quote
Old 08-16-2021, 09:37 AM   #4
THenne1713
Senior Member
 
Join Date: Aug 2017
Location: Memphis
Posts: 394
Send a message via AIM to THenne1713 Send a message via Yahoo to THenne1713
Default

They should touch at top BEFORE the bottom, designed that way... verify nothing in the way, then hold button until all quits moving? (If they touched bottom first, top could never pull in, and designing to touch at same time would be an adjustment nightmare) LUCK to ya
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
THenne1713 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 10:03 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
×