Generally, 1) DIY, just the rubber is about $4/foot in 25-foot MIN rolls, (internet/ Amazon); (Suspect dealer will charge $8-10/ft materials only(??); 2) MFR/ Vendors are steelerubber.com and uni-griprubberproducts.com (URLs might be right/ wrong, you may have to search/ adjust?); 3) Suspect a qualified dealer will remove the slide, (LABOR INTENSIVE PROCESS?), INSTALL new seals (quick/ easy with slide removed), and reinstall/ adjust (height and forward/ back); they (might) even have to build custom sleds to remove slides on? I can easily picture $2k-$3k with 2-3 big slides, maybe more? I DIY replaced one vertical section on one slide on my 20yo rig, and it was a challenge, but worked out OK without slide removal, and suspect I could NOT do the top without slide removal(??) so my DIY cost was $120+/- incl. some silicone caulk. Hope this helps. If your seals are in place, and not torn too bad recommend PURCHASING SILICONE RUBBER SLIDE SPRAY (Walmart/ other sources) and spray well inside and out; makes a HUGE difference
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
|