Top of slide out has gap at gasket
Our '08 5290 front slide out has a huge gap at the top between the outside gasket and slide. It seems like the roller at the front of the slide close to the driver seat is in the wrong place. Instead of on the edge where the metal angle is , it is about a foot towards the rear on the floor panel of the slide out. The rear roller of the slide out is at the far end of it and the slide out frame rides on it , not the floor panel. The front of this slide has settled about 2" , is twisted , etc. Any way to install another roller at the front?
__________________
Jim Zapp
08 BTouring cruiser 5290
07 Ford cutaway chassi
|
Threaded Mode
