Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Gulf Stream Owners RV Forum
 


 
 
Thread Tools Search this Thread Display Modes
 
Prev Previous Post   Next Post Next
Old 10-20-2009, 03:59 PM   #1
David Bott
Senior Member
 
Join Date: Mar 2008
Location: Hilton
Posts: 382
Default PressurePro Tire Monitoring System WARNING!!!!

Ok, so I own a complete PressurePro Tire Monitor system with 10 sensors and even the repeater. The issue and the warning comes in two parts...

1) DO NOT put these on a tow car that has a tire pressure monitoring system as part of the car OR if the value stems are aluminum. The issue is that the PressurePro tire monitors have a brass fitting and when you put it on an aluminum value stem, it will over time weld together! Also sometimes the internal pressure system for the car no longer works and reports as bad sensors in the car when they are not.

I went to check my tire pressure and found this out when I found I could not get the front two sensors off as they would not move. It made more of an issue when the black plastic outside casing broke away from the internal brass fitting and just spun. In order to get it off, I added WD40 and let it set to maybe help it break loose. I then went and purchased a pair of 90 degree bent needle nose pliers so I could get a hold of the brass fitting and then turn. I was able to get it off.

The 2nd part of this warning is about the TMS company I purchased them from and thus had called about the issue. They are the US distributor for the system. I was shocked and amazed to have been told by the president of the company that this warning was given within the install documents and that I could purchase new monitors to replace the bad ones. He further went on to say I may have to CUT OFF and replace my cars valve stems and/or remove the cars pressure monitoring system. Ouch!

So I looked at the docs again, sure, it is in the docs. However when I was talking to him he said they knew of the issue and now included a separate piece of paper about not to install them without adding No-Seize to the threads first. (Thus they knew people were missing it in the manual.) I reminded him that these sensors were added and purchased after the original unit and thus just came by themselves. Nothing else. No warnings, nothing. I added them on the tow car and added them to the programming of the main unit. (Never looked at the manual as I had done it with the coach.)

OK, fine, the warning was in the manual, not well as pointed out and these were added after the fact. I will accept that. However to tell me I needed to buy new ones? Come on, he could have offered to help me out right? Sure he could and I told him so. So he then offered me used ones at $35 each and then new ones at $40 each saving me a whole $20 total. You know, thanks for nothing, but they should have stood behind the issue and just replaced the units at cost. Even more so as they admitted to the issue and that they needed to start to include a separate piece of paper.

I guess I am lucky I got them off without hurting the car and costing me $$$ to fix an issue caused by their OEM product. If they know their is an issue...dang, replace the brass fitting with aluminum ones. After all, this will be more of an issue seeing that I do think pressure monitors are to become a requirement on new cars.

All in all I will spend the money for a complete differnt system before I go with a company that does not do the right thing. As mentioned, he could of offered to sell me units at cost and I would have given the #1 warning above to maybe help others and then said what a great company TMS was by standing behind the issue. But nope...a differnt post that I felt needed to be said. Totally frustrating to say the least. For those that know me from my posts here, knows it takes a lot for me to make such a post.
__________________
David
----------------------
'08 Tour Master T40B
MBE900 Diesel (Mercedes)
08' Saturn Outlook Toad
"To Boldly Go...Because We Can!"
https://www.OutsideOurBubble.com
David Bott is offline   Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ABS brake pressure warning light ScottJ6331 Class C 1 09-07-2015 06:52 PM
Help - Dash Light Warning Jim_PEI Class A 5 07-08-2010 05:24 AM
Water in Fuel warning? MLynch Class A 3 07-14-2009 10:03 PM
Battery Monitoring Panel chamberlain Electrical 8 04-06-2007 11:52 PM
Dish System & Sony surround system darbyjudy Class A 3 09-06-2005 10:22 AM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:17 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×