RecPro led light was terribly straightforward to put in 0.5 associate degree hour it took, no drilling simply splice and crimping wires. I used the strategy the opposite client did. I hooked it to my outside structure light. Bought a DC female and trained a hole underneath my porch light to force the wire thru. simply drill the right side of the outlet for the feminine DC connexion. The male DC connector just crimps the red to red and black to black. I shrank wrap covering those connections. Currently, if you are doing this method to attach you'll get to connect a hot and ground wire to the feminine DC. it's 2 prongs a tiny low and a protracted one the little is that the hot association. . obtain a wire connection from your native automotive store therefore you don.t got to splice. I simply had to splice one wire. create it straightforward on yourself.. nice lighting.