Leveling gear

[Scotdog]

2004 Friendship G7

Just resealed the leveling gear assemblies and having an issue with the levelers stopping as I extend and retract. The motor just stops and I wait a minute and they will resume. I use manual mode and have same issue trying to extend and retract the levelers. The hydraulic tank is at proper level when everything is retracted. Also when retracted and fluid 1/2” from the top the light is on saying levelers are down. HELP Please

[Dennis4809]

The motor is going bad and drawing too much current. Thermal breaker trips then resets. Motor is available through eBay. Outboard motor trim motor. If I was home, I could give you the part number.

[Scotdog]

Ok thank you I will look it up

[THenne1713]

Are they scissors, or hydraulic or ? Brand/ Model ##?

MIGHT also be that they are STABILIZERS ONLY?= NOT JACKS AND NOT DESIGNED TO LEVEL and handle the weights of jacking to level?

If that is the case, then you need to level with plastic blocks under tires, THEN drop these to stop the sway/ rocking. Hope this helps?

[Scotdog]

They are power gear hydraulic on my 04’ friendship g7

[THenne1713]

Edit: Better LINK:
https://support.lci1.com/power-gear-...eveling-system

[Scotdog]

Originally Posted by Dennis4809

The motor is going bad and drawing too much current. Thermal breaker trips then resets. Motor is available through eBay. Outboard motor trim motor. If I was home, I could give you the part number.

You were spot on. Ordered motor and all works great