Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 03-14-2022, 06:44 PM   #1
Chas
New Member
 
Join Date: Mar 2022
Location: Midpines
Posts: 3
Default Possible bad automatic transfer switch (ATS) on 2007 Vista Cruiser Mini

No Micro, A/C, or wall plugs with onboard Onan generator. Plug in shore cord and it all works. ATS located under refrig with no good access even to test let alone R&R. Can't remove refrig; no many other connections through refrig base. May have to cut a hole and create an access panel opening by slide out. Has anyone had to deal with this before? Any suggestions?
Chas is offline   Reply With Quote
Old 03-14-2022, 07:38 PM   #2
RY469
Senior Member
 
Join Date: Apr 2021
Posts: 278
Default

I assume you checked breakers on the generator? Most transfer switches are in the same compartment your power cord coils up in, or in some cases with the power distribution panel. You sure it's under the refer with no access?
RY469 is offline   Reply With Quote
Old 03-15-2022, 01:33 PM   #3
Chas
New Member
 
Join Date: Mar 2022
Location: Midpines
Posts: 3
Default ATS repair on Sprinter van chassis 2007 Vista Cruiser Mini motorhome

Thank you for your reply.
Yes breaker at generator was not tripped and I exercised it off and on.

My breaker/ fuse panel (none were tripped) is located below refrig.
Pulling that away from the cabinet and looking underneath refrig revealed the Inverter and ATS with virtually no way to service, check or remove either item.
I looked at pulling refrig but can't because electrical and gas lines threaded through refrig metal base panel. I wish they were located under a bed or outside compartment.... Has anyone else had this problem in a Sprinter van chassis model RV and how did you deal with it?
Chas is offline   Reply With Quote
Old 03-17-2022, 12:03 PM   #4
hossross
Senior Member
 
Join Date: Jul 2020
Location: Detroit
Posts: 127
Default

I assume you used a volt meter to confirm there is power coming from the generator?
hossross is offline   Reply With Quote
Old 03-20-2022, 05:26 PM   #5
THenne1713
Senior Member
 
Join Date: Aug 2017
Location: Memphis
Posts: 732
Send a message via AIM to THenne1713 Send a message via Yahoo to THenne1713
Default

Sure would be handy if Onan put a 120vac recept on all RV GENs at factory? Hmmmm?
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
THenne1713 is offline   Reply With Quote
Old 01-03-2023, 03:07 AM   #6
Henry111
Member
 
Join Date: Dec 2020
Posts: 69
Default

If you need a transfer switcher, Xantrex is a reasonable size from a trusted company. Simple and clear circuit diagram. You may need to add a male and female connector or connect directly to your system as needed.
Henry111 is offline   Reply With Quote
Old 11-24-2023, 12:00 PM   #7
wchoe
Member
 
Join Date: Sep 2021
Posts: 37
Default

I have the same problem with the Onan generator on the same RV.
How did you solve the problem?

Thanks
wchoe is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 09:48 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×