Warm water for outside connection 19 ERD

[charliedelta]

Found nothing on a search so thought I'd post here. We have used the outside connection on our 19ERD Cruiser a couple of time. This connection is only hooked up to the cold water lines. Since all the plumbing I need is under the bathroom sink I'm considering putting a mixing valve in the line to the outside connection so we could get warm water outside. Anyone see any issues with this setup?

Chuck

[Just two]

There are a lot of camper vans that do that in there builds. I guest you would leave the mix handle exposed?

[THenne1713]

Many floorplans have an outside shower box on the driver side for rinsing feet, shoes, sand, etc. and not putting mud at the entrance on the passenger side.

[charliedelta]

Originally Posted by Just two

There are a lot of camper vans that do that in there builds. I guest you would leave the mix handle exposed?

Just two, The mixing valve i was looking at does not have a lever, the top twists to adjust the water temperature. I figured i would mount it under the bathroom sink, adjust the water temperature and forget about it. although it will be mounted so i can easily get to it LOL.

Originally Posted by THenne1713

Many floorplans have an outside shower box on the driver side for rinsing feet, shoes, sand, etc. and not putting mud at the entrance on the passenger side.

THenne1713, We do not have a shower box, just a quick connect on the drivers side and only connected to the cold water. Sure would have been nice to do that rinsing off with warm water and not COLD. LOL

[THenne1713]

https://www.amazon.com/s?k=rv+outsid...f=nb_sb_noss_1

[charliedelta]

Originally Posted by THenne1713

https://www.amazon.com/s?k=rv+outsid...f=nb_sb_noss_1

I had not seen these when i looked for mixing valves. Will have to see if one will fit.
Thanks
Chuck

[Just two]

Not a bad price. If you added it in an area you could access easily you could get the right temperature.