I'm trying to find entry door locks for our BT 5210 that will fit easily and be keyed somewhat uniquely. Any suggestions or experience?
Thank you!
* I have just read further....is it true that the deadbolt lock is not as easily opened and is somewhat more unique than the latch lock coded with a master key letter? Perhaps this is a fool's errand.
We bought a keypad, remote, unique keyed replacement lock. It has worked seamless. Pretty easy to replace. We did find that our door was bent. We didn’t notice it when we bought it, but it was a good time to straighten it with the lock removed.
You do need to make sure you get the right size. There is at least 2 major types.
We got ours on Amazon it is from LATCH.IT There are cheaper ones available.
We used the 3.50”wide x 4.50” tall x 1.5” thick unit. There are smaller sized one that will not work. Be careful.
One thing we noticed is that the inside handle is small. We added a separate extra handle and that works great.
You do need to make sure you get the right size. There is at least 2 major types.
We got ours on Amazon it is from LATCH.IT There are cheaper ones available.
We used the 3.50”wide x 4.50” tall x 1.5” thick unit. There are smaller sized one that will not work. Be careful.
One thing we noticed is that the inside handle is small. We added a separate extra handle and that works great.
Entry door lock
Linear Mode
