Not sure which is which in your rig, but typical= 100a-main (also feeds sub-breakers); then one breaker for Hydraulic PUMP, GEN Starter, STEPS (usually around 25a?); one= 12VDC BATTERY CABLE TO/ FROM CONVERTER/ FUSE PANEL. The little CUBE RELAYS are (usually?) tied to the safety switches for hydraulics? Do you have three slides, or two plus Jacks? E.g. On my Class-C two slides, two cube relays energized when IGN=ON= slides will NOT work; On some rigs, parking Brake Switch, or Driver seat Switch (to prevent slide/ seat damage) Hope this helps?
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
|