Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-27-2020, 05:53 PM   #1
krswolf
New Member
 
Join Date: Apr 2020
Posts: 7
Default Bumper too small for sewer hose!

Hi, I have a 1995 Gulfstream Conquest, Class C. I had to purchase a new sewer hose, but my bumper is 1/4 inch too small! I can barely get the hose in and out, and am afraid I will tear the hose pulling it out. Same problem with the end caps.
Any ideas on finding a smaller diameter hose and end cap that will fit my old bumper?
Thanks! Kate
krswolf is offline   Reply With Quote
Old 04-27-2020, 09:13 PM   #2
Colorado350
Member
 
Colorado350's Avatar
 
Join Date: Oct 2019
Posts: 80
Default

Hey Kate,

I just put a 5x5 Vinyl fence post on top of the stock bumper. I bought fence post caps that I plan to secure with bungee cords. Making the caps on both ends removable will allow me to rinse out the bumper a couple times a year at a local car wash or with a garden hose and a little soapy water. The post was $26 at Lowe’s the caps $6 at Home Depot.
Attached Images
File Type: jpg 74C461CD-A46A-4BFD-ACC1-F81FBC1244EF.jpg (136.4 KB, 4 views)
__________________
John
People sleep peacefully in their beds at night only because rough men stand ready to do violence on their behalf.
Colorado350 is offline   Reply With Quote
Old 04-28-2020, 01:13 PM   #3
krswolf
New Member
 
Join Date: Apr 2020
Posts: 7
Default Thanks!

Hi John, Thanks so much for the idea and the picture! How did you secure the vinyl post to the bumper? Kate
krswolf is offline   Reply With Quote
Old 04-28-2020, 05:46 PM   #4
Colorado350
Member
 
Colorado350's Avatar
 
Join Date: Oct 2019
Posts: 80
Default

I drilled holes in both and used short carriage bolts (1/4”) and used fender washers. It would have been easier to drill holes through the top then use an extension and use self tapping screws with fender washers. Then use a rubber plug to plug the top holes…I just didn’t want to cut holes in the post.
I’ll be honest the way I did it was a PITA!!
__________________
John
People sleep peacefully in their beds at night only because rough men stand ready to do violence on their behalf.
Colorado350 is offline   Reply With Quote
Old 04-28-2020, 06:54 PM   #5
krswolf
New Member
 
Join Date: Apr 2020
Posts: 7
Default Thanks!

Oh geez! Maybe I'll try duct tape!
krswolf is offline   Reply With Quote
Old 04-29-2020, 08:55 PM   #6
Colorado350
Member
 
Colorado350's Avatar
 
Join Date: Oct 2019
Posts: 80
Default

Quote:
Originally Posted by krswolf View Post
Oh geez! Maybe I'll try duct tape!
Actually Kate you could use 3M Extreme Mounting tape to secure the post to the original bumper. Make sure both are CLEAN run the tape along the length of the bumper, mount the post add some weight along the length of the post to ensure a solid bond. You can also add long zip ties to add extra security if you want.


Scotch Extreme Mounting Tape, 1-inch X 400-inches, Black, 1-Roll (414-LONGDC) - 2 Pack https://www.amazon.com/dp/B07VCG9QQ2..._m7IQEb8CA59YW


https://www.securecableties.com/48-i...4aApnCEALw_wcB
__________________
John
People sleep peacefully in their beds at night only because rough men stand ready to do violence on their behalf.
Colorado350 is offline   Reply With Quote
Old 05-01-2020, 05:16 PM   #7
krswolf
New Member
 
Join Date: Apr 2020
Posts: 7
Default Thanks!

Thank you so much, John! You're Great! Kate
krswolf is offline   Reply With Quote
Old 05-03-2020, 02:01 PM   #8
jamesham
Member
 
Join Date: Aug 2015
Posts: 52
Default

The white plastic fence post cover has worked well for us. Our Gulfstream does not have a defined bumper, just one big fiberglass piece on the rear cap. So we installed it under the rear overhand with nylon cable zip ties. It is still there after 3 years, so no problems. It is large enough to get the hose in with the plastic locking tabs attached. The 90 degree angle must be removed of course.


Quote:
Originally Posted by krswolf View Post
Hi, I have a 1995 Gulfstream Conquest, Class C. I had to purchase a new sewer hose, but my bumper is 1/4 inch too small! I can barely get the hose in and out, and am afraid I will tear the hose pulling it out. Same problem with the end caps.
Any ideas on finding a smaller diameter hose and end cap that will fit my old bumper?
Thanks! Kate
jamesham is offline   Reply With Quote
Old 05-03-2020, 05:00 PM   #9
krswolf
New Member
 
Join Date: Apr 2020
Posts: 7
Default Bumper too small

That just might work for me. I can't put it under or on top of the bumper, because there is hardware in the way. But I will look into fastening it under the RV itself. Thanks! Kate
krswolf is offline   Reply With Quote
Old 05-04-2020, 01:31 PM   #10
THenne1713
Senior Member
 
Join Date: Aug 2017
Location: Memphis
Posts: 216
Send a message via AIM to THenne1713 Send a message via MSN to THenne1713 Send a message via Yahoo to THenne1713
Default

Quote:
Originally Posted by krswolf View Post
Hi, I have a 1995 Gulfstream Conquest, Class C. I had to purchase a new sewer hose, but my bumper is 1/4 inch too small! I can barely get the hose in and out, and am afraid I will tear the hose pulling it out. Same problem with the end caps.
Any ideas on finding a smaller diameter hose and end cap that will fit my old bumper?
Thanks! Kate
SUSPICION that you are not aligning the TITS on the hose fittings into the CORNERS of the bumper; this is required to make the hose fit.
__________________
THenne1713
99-Conquest 6266, E450SD, 6.8, 2v, V-10
THenne1713 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 07:09 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×