Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-12-2020, 02:40 PM   #1
ccrown4
New Member
 
Join Date: Feb 2020
Posts: 2
Default GFI location

2002 Seahawk XL M -29FBR
I found the one circuit breaker by the laboratory but the one one to the kitchen and outside outlets eludes me. I looked under sink cabinet, outside lockers and front compartments with no luck. Any help would be appreciated.
Joel
ccrown4 is offline   Reply With Quote
Old 02-13-2020, 10:01 AM   #2
UAHaerospace
Member
 
UAHaerospace's Avatar
 
Join Date: Apr 2019
Posts: 50
Default

not sure what you're asking, but the 'main' GFCI outlet, with the reset button, in the bathroom, usually also controls the kitchen outlets and the outside outlets. Once you reset the bathroom outlet, the others should be powered.

if not, you've lost a connection, probably on the back of the GFCI outlet itself.
UAHaerospace is offline   Reply With Quote
Old 02-13-2020, 08:26 PM   #3
ccrown4
New Member
 
Join Date: Feb 2020
Posts: 2
Default

Thanks for the reply. . Bathroom GFCI IS good and no loose wires, only one set in one set out. It just seems there should be another GFCI for the kitcgen area. The GFCI in the bathroom controls bedroom, living area and it is funtioning as it should. It was not tripped. All outlets in kitchen area including the outdoor outlet have no power.. i looked behind drawers, under sink cabinet, microwave area, outside bay areas. Really stumped.
Thanks for your help
I
ccrown4 is offline   Reply With Quote
Old 02-23-2020, 12:57 PM   #4
Mebryant
New Member
 
Join Date: Apr 2017
Posts: 5
Default

OK. This may sound strange but we had a problem with the kitchen GFCI on our 2008 Vista Cruiser and it was related to the antenna/cable switch/plug in the cabinet over the sink.
Mebryant is offline   Reply With Quote
Old 02-23-2020, 01:44 PM   #5
THenne1713
Senior Member
 
Join Date: Aug 2017
Location: Memphis
Posts: 200
Send a message via AIM to THenne1713 Send a message via MSN to THenne1713 Send a message via Yahoo to THenne1713
Default

My kitchen GFI is on bottom of cabinet over sink; bend over and look up?
__________________
THenne1713
99-Conquest 6266, E450SD, 6.8, 2v, V-10
THenne1713 is offline   Reply With Quote
Old 02-23-2020, 02:34 PM   #6
[email protected]
New Member
 
Join Date: Aug 2018
Posts: 2
Default

Mine is in the main breaker box in the cabinet under the kitchen sink. I have a rear kitchen and the shore power comes in from the rear.
bob@dbbaits.com is offline   Reply With Quote
Old 02-23-2020, 06:44 PM   #7
jmorris
New Member
 
jmorris's Avatar
 
Join Date: Jan 2011
Location: Brandon
Posts: 10
Default

I am Understanding bath room, kitchen and outside do not work. Reset is not tripped. If it trips when you reset, you have a short to ground. If you do not have basic knowledge do not try this. Test Line wires, White Should be Ground Black Hot. Should read 110-120 between White and Ground Black Hot. If Yes then bad GRI Outlet…… If not 1-Triped breaker in panel. 2- Bad Breaker in panel. 3- broken White or Ground Black Hot.
Attached Images
File Type: png Hold Folder Pute 1234 GFCI-Outlet.png (21.3 KB, 1 views)
jmorris is offline   Reply With Quote
Old 02-24-2020, 02:25 PM   #8
Puettz
New Member
 
Join Date: Sep 2019
Posts: 2
Default

I had the same problem with my mothorhome. My GFI under the kitchen cabinet was not tripped. The problem ended up being the Inverter next to the batteries. There was a 15 amp switch and a 20 amp switch and the 20 amp was tripped. You might want to check that. Good luck!
Puettz is offline   Reply With Quote
Old 02-24-2020, 04:57 PM   #9
jmorris
New Member
 
jmorris's Avatar
 
Join Date: Jan 2011
Location: Brandon
Posts: 10
Default

Yes sounds like no power to GFI.
jmorris is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 07:49 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×