Slide Adjustment
Darby, with the slide out, there should be adjustment bolts on the outside underneath the wall of the slide room. You will need to loosen the bolts holding the bracket and jamb nut; then adjust the verticle bolts so that the outside wall is pushed up, since yours is a little low. Tighten the bolts holding the bracket to wall and the jamb nut on the adjusting bolt. Good luck and let us know how it turns out.
__________________
Mike, Amy & Muffin, Full Timers
RVSA Certified Master Technician
iRV2.com Moderator
iRV2.com -Gulf Stream Owners Forum Leader
2000 Scenic Cruiser
99 Chevy Silverado 4 X 4 Toad
2006 Saturn Vue AWD Toad
NASCAR #3 & #8
|