Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 11-13-2022, 04:34 PM   #1
Tim 6316
New Member
 
Join Date: Jul 2019
Posts: 10
Default No Power to slide.

2006 Class C Conquest 6316. Also noticed no power to light in the compartment which has the slide motor. Side went out 2 inches, then stopped. I suspect it's a fuse, but can't find it. Main panel fuses are fine, fuses/breakers in battery compartment are fine. Even changed the slide switch. Must be a fuse somewhere. Any ideas ladies and gentlemen? FYI, its electric motor (I replaced in 2019), emerg brake is on, seat is forward, and engine is off.
Tim 6316 is offline   Reply With Quote
Old 11-27-2022, 10:52 AM   #2
Lchristler
New Member
 
Join Date: Jul 2017
Posts: 1
Default

Try looking for a small relay wired inline in the battery compartment with the hydraulic slide and jack motor.
Mine was wrapped with electrical tape. The terminals were badly corroded. It is hot when the parking brake is set. Now we only use parking brake to use slide, then release it.
Hope this helps.
Lchristler is offline   Reply With Quote
Old 11-27-2022, 07:37 PM   #3
THenne1713
Senior Member
 
Join Date: Aug 2017
Location: Memphis
Posts: 604
Send a message via AIM to THenne1713 Send a message via Yahoo to THenne1713
Default

The 12VDC CIRCUIT BREAKERS are usually next to battery, or within 18". Mine are under step beside battery/ battery switch. On mine, DEWALD hydraulic, FORWARD/REVERSE SOLENDOIDS were sticking engaged after switch released, and would trip the breaker. Repalcing solenoids and breaker cured my issue. Good Luclk
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
THenne1713 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 03:22 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
×