JU

About Latest activity Postings Photos Albums

  • Loading…
    • JU
      Just two replied to the thread Coach/ chassis solenoids.
      Chuck, you are awesome. You are good with these RVs and their wiring. You are so willing to help. Thank you,
    • JU
      Just two posted a comment on the album Working on the inside.
      What fun building that camper. Now we are at the point that all the major changes are done we get to use and enjoy it. Every trip does...
    • JU
      Just two replied to the thread chassis battery charging.
      I HAVE learned to hit the disconnects when our coach is going to sit for any time & have never had the discharged problem since. Do...
      • IMG_0757.jpeg
      • IMG_0758.jpeg
    • JU
      Just two replied to the thread Coach/ chassis solenoids.
      Can you send a picture or two? That would help identify things.
    • JU
      Did some testing this morning. Ran the Ford and got about 50 amps of power to the 12 volt system from the alternator. Looks like the 24...
      • IMG_1437.jpeg
      • IMG_1436.jpeg
    • JU
      I’m working on a 2021 BT 5210 Ford E350 chassis. What do you have? The battery box is on driver side just in front of the rear tire...
      • IMG_1410.jpeg
      • IMG_1409.jpeg
    • JU
      Just two replied to the thread Leafs.
      I like the cardboard. Works good for us shade tree mechanics.
      • IMG_1410.jpeg
    • JU
      Specific Concerns: I seems like the DC/DC charger would be able to fully charge the battery even with the old converter. It doesn't seem...
    • JU
      Good stuff, thanks. I finished replacing the smaller lithium batteries with the big 300 amp hour one. I found it easier to remove all...
      • IMG_1401.png
      • IMG_1409.jpeg
      • IMG_1410.jpeg
    • JU
      Just two replied to the thread Intellitec B.I.R.D. Location.
      Thanks, That is a good summary. Should help future searchers.
    • JU
      Just two replied to the thread Intellitec B.I.R.D. Location.
      Thence, I believe you are right. It is actually labeled as an Isolation Relay. (With time delay). It was acting as a bidirectional...
      • IMG_1431.jpeg
      • image.jpg
    • JU
      Just two replied to the thread Intellitec B.I.R.D. Location.
      Ok the weather held out a little. I was able to get the battery installed and wired. Still need to do more testing. I set the system...
      • IMG_1420.jpeg
      • IMG_1430.jpeg
      • IMG_1424.jpeg
    • JU
      Just two replied to the thread Intellitec B.I.R.D. Location.
      When my steps are working correctly. They go out when the door is opened by the magnetic switch on the door. They go in when the door is...
    • JU
      Just two replied to the thread Intellitec B.I.R.D. Location.
      I studied your prints again. They look good. I noticed your first print has the powered steps circuit for the ignition on the lower...
    • JU
      Just two replied to the thread Intellitec B.I.R.D. Location.
      I like your plan, that it makes minimal changes to the existing wiring. I want to simplify the circuit as much as possible. Remove the...
  • Loading…
  • Loading…
  • Loading…

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top