I’m 3 days into a 3 week cross country trip and my rear left inside tire blew out and took with it a fair number of my generator powered wiring harness. In all there were 25 wires of varying gauges, and a 2 gauge (what I thought was a battery cable but turned out to be a...) ground. The ground attached to a power bar behind the fridge outlet (accessed through the outside maintenance hatch for the fridge). The remaining wires entered the cabin from the wheel well, behind where my washer/dryer is in the bathroom. I’ve got all but 4 reconnected. Everything EXCEPT the fridge and hot water heater work in shore power mode, only the microwave, water pump, and select lighting works in generator mode (neither AC, not fridge or hot water).
The transfer switch under the bed clicks, trying to close the circuit, but then clicks back open. I’m wondering if anyone has any ideas on what would cause a transfer switch to do this, considering that I still have 4 wires yet to find homes (2 of which have a male adapter on the end (2 wires, 1 white 1 black, into the one adapter, the wires appear to be 18 gauge). The other broken wires I have yet to place are 14/16 gauge red, and 14/16 gauge pink.
I haven’t been able to find a complete wiring diagram for my model (2007 Independence 8537, 35 foot). Also, not a single service department, camping world, roadside rv tech, mechanic, or other has been willing/able to help, they either don’t want to tackle it, or quote 2 week wait times. I’m not doing this work by choice, I have my wife, infant, and 2 dogs in the RV and just need to patch her together good enough to get somewhere that can do a proper servicing.
Thanks!
The transfer switch under the bed clicks, trying to close the circuit, but then clicks back open. I’m wondering if anyone has any ideas on what would cause a transfer switch to do this, considering that I still have 4 wires yet to find homes (2 of which have a male adapter on the end (2 wires, 1 white 1 black, into the one adapter, the wires appear to be 18 gauge). The other broken wires I have yet to place are 14/16 gauge red, and 14/16 gauge pink.
I haven’t been able to find a complete wiring diagram for my model (2007 Independence 8537, 35 foot). Also, not a single service department, camping world, roadside rv tech, mechanic, or other has been willing/able to help, they either don’t want to tackle it, or quote 2 week wait times. I’m not doing this work by choice, I have my wife, infant, and 2 dogs in the RV and just need to patch her together good enough to get somewhere that can do a proper servicing.
Thanks!
