Hi guys I just bought a 2014 canyon trail 28FBHB and haven't been able to find the switch for the docking lights. I've looked on gulfstreams sight for owners manual but only find a generic listing. any help would be greatly appreciated.
Typically, the switch for the docking lights is located near the entrance door or on the control panel inside the RV. It might also be integrated into the main light switch panel. If you can't find it there, check around the exterior near the docking lights themselves; sometimes, there's a separate switch mounted near the lights for convenience.
thank you for your reply. I've looked all around the front and side belly access found nothing there is not a switch on control panel and none of the other light switches will turn them on. I've tried to trace down where the power wire runs to but lose it in the ceiling really don't want to remove ceiling if i don't have to.
thank you for your reply. I've looked all around the front and side belly access found nothing there is not a switch on control panel and none of the other light switches will turn them on. I've tried to trace down where the power wire runs to but lose it in the ceiling really don't want to remove ceiling if i don't have to.
That’s a tough one. Ask around for a back feed line tester. Ho to the light/bulb socket and back feed the power. See how far you can chase it.
Side note; check under your wall upper cabinets. Stranger things have happened.
Mike
In Saint George Utah
