An RVer is struggling to replace hardened and shrunken window rubber seals, finding that off-the-shelf strips are close but not a perfect fit for the original extrusion. Despite obtaining samples from glazing outlets and auto trim specialists, none have matched the original profile well enough to hold the glass securely. Other members suggest checking for any remaining undamaged sections of the original seal to use as a reference and recommend consulting auto glass shops for both advice and...
More...
An RVer is struggling to replace hardened and shrunken window rubber seals, finding that off-the-shelf strips are close but not a perfect fit for the original extrusion. Despite obtaining samples from glazing outlets and auto trim specialists, none have matched the original profile well enough to hold the glass securely. Other members suggest checking for any remaining undamaged sections of the original seal to use as a reference and recommend consulting auto glass shops for both advice and potential solutions.
A highly experienced member provides a link to a specialized supplier (Steel Rubber) and notes that some companies can custom-extrude seals to match an exact cross-section if needed. The original poster identifies a promising product from the suggested supplier and plans to inquire about international shipping. The consensus is that persistence in sourcing and possibly custom fabrication are the best paths forward when standard profiles do not fit.
