Gulfsream vintage cruiser 23rss slide fuse location

[Veector]

Does anyone know where this is? I don’t seem to have power to the 13398-do controller. No fuse for it in the normal fuse box. Ideas?

 

[tmbrwlvs]

You might check under the tongue area of the trailer frame. Mine is near the battery area & a 30 amp.

 

[THenne1713]

Does anyone know where this is? I don’t seem to have power to the 13398-do controller. No fuse for it in the normal fuse box. Ideas?

Most slides are fed/ fused direct from battery, so look for 12vdc circuit breaker there beside battery? With bumper pull, slide under tongue and look up and follow POS+ battery cable to the protection devices. After that, if LCI/ LIPPERT/ Schwintek, maybe some motor protection built into motor controllers. Otherwise, check procedure/ safety devices? I.e. 1) Parking brake, driver's seat position (some need to be fully forward and tilted forward to prevent slide damage?); 2) IGN=Off? 3) (Some brands) might require jacks down?

How To Operate a Schwintek Slide and Troubleshooting You Can Do

If your Schwintek Slide ever gets struck, here's your guide to fixing it before visiting a repair shop. Learn more here!

blog.campingworld.com

 

[Veector]

You might check under the tongue area of the trailer frame. Mine is near the battery area & a 30 amp.

Thanks, that was it. In front of battery under hitch.

 

[tmbrwlvs]

Great! Glad that’s what it was!

 

[Veector]

I was wrong. The fuse I found was for the hitch motor. Still have not found the slide fuse.