for those who are having problems hooking up a TV, here's something I found. The TV I added would not pickup any stations regardless of whether the power button was on or not. Cable connection was a no-go too.
I pulled off the panel where the coax from the TV goes and found there are three coax cables wired to a small circuit board on the back. Mine were wired wrong from the factory (imagine that). The coax from the roof-top antenna was connected to "TV2" port (which is for the outside tv). The coax from the outside TV connection was connected to the "Cable". And the third cable had a bad connector which I had to replace. Once all cables were connected where they were supposed to be the TV found all my local channels.
Don't assume the folks at the factory did their job....
I pulled off the panel where the coax from the TV goes and found there are three coax cables wired to a small circuit board on the back. Mine were wired wrong from the factory (imagine that). The coax from the roof-top antenna was connected to "TV2" port (which is for the outside tv). The coax from the outside TV connection was connected to the "Cable". And the third cable had a bad connector which I had to replace. Once all cables were connected where they were supposed to be the TV found all my local channels.
Don't assume the folks at the factory did their job....