I have a Gulfstream Cresendo 8390 CRW.
I have a Dometic PowerPro awning that does not have any power to the control box. This is located on the curbside next to the entry door.
I have checked the fuses in the compartment below the drivers seat. It shows 3 fuses for a power awning in fuse block B. A9, B7 & B11.
These 15 amp fuses are all good and have 12 volts on 1 leg to ground.
Is there another feed to this awning that I'm not seeing? Or a interlock?
When you say "Control Box" do you mean the switch mounted on the panel just inside the door, or the remote control receiver box? Either way, don't neglect checking for a good ground connected to the awning motor, also there is (normally) an inline fuse, most times stuffed inside the wall with all the wires behind the panel beforementioned.
Dometic power awning, no power
Linear Mode
